From 1 - 10 / 70
  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 1500 m cable consisting of 120 hydrophone groups for the 30-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data followed a detailed sequence: Quality control, Amplitude recovery, Deconvolution, Velocity analysis, Multiples attenuation, NMO corrections, Mute, Trace weighting, Stack, F-X Deconvolution,Filter, Balance.

  • During austral summer1994/95, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SANSCRITO (Seismic ANalysis SCotia RIdge Tectonic Outcome) programme was a seismic exploration cruise in the Scotia Sea to understand the tectonic history and evolution of the region; data were collected between longitude 45 and 54 degrees West, and latitude 59 and 65 degrees South. During this programme 1990 km of 30-fold multichannel seismic reflection (MCS) data, 14 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 80 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientist on this programme was: Emanuele Lodolo of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, and Dynamic trace equalisation.

  • During austral summer1994/95, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SANSCRITO (Seismic ANalysis SCotia RIdge Tectonic Outcome) programme was a seismic exploration cruise in the Scotia Sea to understand the tectonic history and evolution of the region; data were collected between longitude 45 and 54 degrees West, and latitude 59 and 65 degrees South. During this programme 1990 km of 30-fold multichannel seismic reflection (MCS) data, 14 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 80 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientist on this programme was: Emanuele Lodolo of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, and Dynamic trace equalisation.

  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data ; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. During the Programme SEDANO nine (9) 60-fold multichannel seismic lines were collected in the Antarctic Peninsular. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 3000 m cable consisting of 120 hydrophone groups for the 60-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. The Chief Scientist on this programme was: Angelo Camerlenghi of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Filter, Balance.

  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 1500 m cable consisting of 120 hydrophone groups for the 30-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data followed a detailed sequence: Quality control, Amplitude recovery, Deconvolution, Velocity analysis, Multiples attenuation, NMO corrections, Mute, Trace weighting, Stack, F-X Deconvolution,Filter, Balance.

  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 1500 m cable consisting of 120 hydrophone groups for the 30-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. Processing of the data followed a detailed sequence: Quality control, Amplitude recovery, Deconvolution, Velocity analysis, Multiples attenuation, NMO corrections, Mute, Trace weighting, Stack, F-X Deconvolution,Filter, Balance.

  • During austral summer1994/95, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SANSCRITO (Seismic ANalysis SCotia RIdge Tectonic Outcome) programme was a seismic exploration cruise in the Scotia Sea to understand the tectonic history and evolution of the region; data were collected between longitude 45 and 54 degrees West, and latitude 59 and 65 degrees South. During this programme 1990 km of 30-fold multichannel seismic reflection (MCS) data, 14 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 80 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientist on this programme was: Emanuele Lodolo of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, and Dynamic trace equalisation.

  • During austral summer1994/95, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SANSCRITO (Seismic ANalysis SCotia RIdge Tectonic Outcome) programme was a seismic exploration cruise in the Scotia Sea to understand the tectonic history and evolution of the region; data were collected between longitude 45 and 54 degrees West, and latitude 59 and 65 degrees South. During this programme 1990 km of 30-fold multichannel seismic reflection (MCS) data, 14 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 80 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientist on this programme was: Emanuele Lodolo of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, and Dynamic trace equalisation.

  • During austral summer1994/95, the National Institute of Oceanography and Applied Geophysics - OGS, on board the research vessel OGS-Explora, conducted marine geological and geophysical surveys along the Antarctic Peninsula. The SANSCRITO (Seismic ANalysis SCotia RIdge Tectonic Outcome) programme was a seismic exploration cruise in the Scotia Sea to understand the tectonic history and evolution of the region; data were collected between longitude 45 and 54 degrees West, and latitude 59 and 65 degrees South. During this programme 1990 km of 30-fold multichannel seismic reflection (MCS) data, 14 second records, 4 ms sample rate, were recorded on a SERCEL SN 358 DMX system. The source consisted of an airgun array with a total volume of 80 litres fired every 50 meters into a 3000 m cable consisting of 120 hydrophone groups towed at an average depth of 12 m. A GPS + TRANSIT satellite receiver system was used for navigation. The Chief Scientist on this programme was: Emanuele Lodolo of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Mixing, Filter, and Dynamic trace equalisation.

  • In Austral Summer 1994-95 the National Institute of Oceanography and Applied Geophysics - OGS conducted marine geological and geophysical surveys over the Antarctic Peninsular. During this cruise five (5) research programmes were conducted for a total approximately of 4469 km of multichannel seismic reflection (MCS) data. The research programmes were: SEDANO (SEdiment Drifts of the ANtarctic Offshore) with 1340 km of MCS data ; SITE SURVEY, ODP Proposal # 452 (Antarctic Glacial History and Sea-Level Change) with 507 km of MCS data; SANSCRITO (Seismic ANalysis SCotia Ridge Tectonic Outcome) with 1990 km of MCS data and ANGELINA (ANtarctic GEophysical Long range INternational Acquisition programme) with 632 km of MCS data. During the Programme SEDANO nine (9) 60-fold multichannel seismic lines were collected in the Antarctic Peninsular. The surveys were carried out by the research vessel OGS Explora. The digital MCS data were recorded on a SERCEL SN 358 DMX system. The source consisted of two GI guns with a total volume of 6.7 litres fired approximately every 25 meters into a 3000 m cable consisting of 120 hydrophone groups for the 60-fold profiles. A GPS + TRANSIT satellite receiver system was used for the navigation. The Chief Scientist on this programme was: Angelo Camerlenghi of the National Institute of Oceanography and Applied Geophysics - OGS, Borgo Grotta Gigante n. 42/C, 34010 Sgonico (Trieste), Italy. Processing of the data generally followed a conventional sequence: Reformat, Trace-sum with differential NMO, Quality control, Amplitude recovery, Deconvolution, Velocity analysis, NMO corrections, Mute, Trace weighting, Stack, Filter, Balance.